Scale Management

View only. Adding or changing anything here is done with the support login.

Definitions: loading… Back to Setup

Site Scales

Named scales the operators pick on the weigh forms and kiosks; tickets record the scale name with each weighment. Link each scale to a hardware feed from a connected reader service below — a scale with no feed is driven by the simulator in Demo Mode. The optional per-scale printers receive that scale's tickets; "Default" uses the site-wide printers from the Printers page. Assigning a Location limits the scale to operators at that location — locations themselves are managed on Setup → Locations. Changes save immediately.

Name	Hardware Feed	Live Weight	Location	Inbound Printer	Outbound Printer	Axles / Stop Light	Position	Order	Active

Checking scale services...

Scale ID

Display Name

Brand / Model

IP Address

Port

Request Command (optional override)

Poll Interval (ms)

Timeout (ms)

Active

Continuous Stream

Listens for a few seconds and works out where the weight sits in each frame. Put a load on the scale first — a weight that changes is much easier to find.

Scale Management

Axle Weighing & Stop Light:

Position of

No Scale Services Connected

Add Scale

Live Weight —

Simulated Kiosk